Skip to content
Kay's Tiny House
Kay's Tiny House
  • Blog
  • About Me
Kay's Tiny House
tiny house trailer

Tiny House Trailer Arrival

Posted on May 22, 2023May 22, 2023 By themilesfiles

The tiny house trailer is here!!!

tiny house trailer

It’s 24′ x 10′ with an 8′ gooseneck platform. I bought it from Joshua at Tiny House Basics. I ordered the trailer back in December 2022 knowing that it wouldn’t be ready until at least March 2023. As you can see from this blog, I’ve been pretty busy prepping land and getting things aligned before the build, so there was definitely no rush.

While gooseneck trailers are great for maneuvering and hauling, they can get a bit tricky with hills. The plan is to build the house at Doug and Debby’s barn (which has all the needed tools and can store the materials we need to build). There’s a dip in front of the entryway gate, so we had some challenges getting the trailer in. Tiny House Basics connected me with Coast to Coast to deliver the trailer. When trying to back the trailer in past the hill, the gooseneck platform started pressing against the delivery truck’s flat bed. He was at least able to get it all the way through the gate.

trailer within the gate

Not too bad, but we really wanted it parked on the slab behind the barn. Luckily, Doug is super creative. He figured we could use his tractor to push the trailer where we wanted it.

I was worried about basic things like safety, but Doug was undeterred. With physics on his side, he was able to push the trailer so that it faced the barn. He then drove around to the other side to push the trailer onto the slab.

trailer being pushed by the tractor
trailer being pushed by the tractor onto the slab

Success!

It looks smaller in person, but it is a tiny house after all. Overall, I’m super happy with the trailer. I chose to purchase my trailer from Tiny House Basics because I liked the idea of the crossbeams acting as a subfloor. Some of the pipes will run underneath the floor, so we’ll add 2x4s on these cross beams, but that additional structure and insulation for the “foundation” of the trailer is going to be great. I also had the trailer manufacturer add tie down rods in the places that the design asked for, so that’s one less thing I have to do myself.

If you’re interested in watching the delivery in action, check out this video:

tiny house

Post navigation

Previous post
Next post

Related Posts

tiny house

Building my tiny house: DIY cedar tongue and groove siding

Posted on September 9, 2024October 6, 2024

When it comes to building your own tiny house, every detail feels personal. I’ve touched every single 2×4 that makes up the frame of the house. I’ve handled every piece of plywood that sheathes the floor. One of the most rewarding experiences in my tiny house journey was making and…

Read More
tiny house Tyvek house wrap on tiny house

Building my tiny house: Sheathing the roof and adding house wrap

Posted on September 2, 2024September 2, 2024

I used the same OSB sheathing with the radiant barrier that I used for the siding on the roof. While on the siding, they recommend you install it shiny side facing out, on the roof they recommend installing it shiny face down. I had a lot of fun with this…

Read More
tiny house

Building my tiny house: framing the walls

Posted on January 19, 2024January 19, 2024

What was just a flat trailer is now looking more like a tiny house! Sorry for the delay, the framing of the wall was finished back in December 2023, but I just now have found time for this blog post. Framing tiny house walls is a lot like framing regular…

Read More

Hi, I'm Kay!

Kay and Taco the corgi

Join me and my corgi, Taco, as I build my very own tiny house. I have zero build experience, but I do have lots of drive and very amazing friends. I also share tips on minimalism, intentional living, and financial freedom.

  • YouTube
  • Instagram

©2026 Kay's Tiny House | WordPress Theme by SuperbThemes