Building my tiny house: Sheathing the roof and adding house wrap Posted on September 2, 2024September 2, 2024 By themilesfiles I used the same OSB sheathing with the radiant barrier that I used for the siding on the roof. While on the siding, they recommend you install it shiny side facing out, on the roof they recommend installing it shiny face down. I had a lot of fun with this project because gravity was working with us versus against us. Using the framing nail gun was less scary, and I did a lot on the lower roofing. Climbing up and down the scaffolding reminds me of being a kid at recess playing on the jungle gym. Except now I’m an adult, and the fear of falling is REAL. When I was a kid, I was fearless. What happened?! I was grateful for Phil and Doug during this project because they came up with some pretty innovative ideas for getting the huge pieces of OSB up to the roof. For the lower roof, Phil was able to hoist it up, Doug could grab hold of it, and Phil would climb the scaffolding to help get the board onto the roof. We screwed little pieces of wood around the edges to keep the OSB from sliding off the roof. On the higher roof part, Doug recommended we tie a rope around the sheathing and then he would hoist it up. I was very skeptical of this, but it actually worked! You’ll definitely have to check out the YouTube video, linked at the end of this article, and check it out! Surprisingly, we were able to get all the roof sheathing done in one day. We even got to start adding the roof underlayment. This black paper is used as a barrier between the sheathing and the roofing material. In my case, I’m going to use metal roofing. I ended up running out of the roofing paper, but we were able to find some extra paper in Doug’s barn (a la Mary Poppins’ bag). Another day, another project. We were ready to add the Tyvek house wrap over the OSB sheathing on the walls. The house wrap was one of the easiest things we’ve had to do so far. We used the same nails and with red caps that we used with the roof underlayment. I was thankful for this step because it also meant my house no longer looked like a Tesla Cybertruck! Phew. Check out the action below! tiny house diyhouse wraproof underlaymentsheathingtiny houseTyvek
tiny house Building my tiny house: framing the walls Posted on January 19, 2024January 19, 2024 What was just a flat trailer is now looking more like a tiny house! Sorry for the delay, the framing of the wall was finished back in December 2023, but I just now have found time for this blog post. Framing tiny house walls is a lot like framing regular… Read More
tiny house Installing Skylights in My Tiny House Posted on October 19, 2024October 6, 2024 One of the features I knew I wanted in my tiny house from the very beginning was skylights. Living in a small space, natural light is key to making the house feel open and bright, and skylights provide a perfect solution. Recently, I tackled the installation of not one, but… Read More
tiny house Installing and painting the front door for my tiny house Posted on October 5, 2024October 6, 2024 I’m not going to lie—when I first started building my tiny house, the idea of installing a front door felt like one of those “big deal” moments. It’s the literal entryway to my new home! I wanted to share my experience of this milestone! Step 1: Choosing the Door The… Read More